Vintec I®
Vintec I® is a normal impact, high corrosion resistant polyvinyl chloride (PVC) sheet. Because of its exceptional corrosion resistance, it is ideally suited for applications where maximum chemical resistance is necessary. Its high strength-to-weight ratio, cost efficiency, ease of fabrication and eco-balance make it the material of choice.

Characteristics:
• Good Impact	• Manufactured with no plasticizers or fillers
• Machinable	• Available in numerous colors, finishes and sizes
• Weldable	• Excellent Fire Ratings (UL-94V-0) and a flame spread under 20 per ASTM E-84
• Low Cost	• Conforms to ASTM D-1784-99 Class 12454-B (Formerly Type I Grade I)
• High Compressive Strength	• Can be used in self supporting construction up to 140°F

Availability:

Color	Finish	Thickness	Width	Length
Dark Gray	Smooth	1/16" - 4" 1/4" - 2"	48" 48"	96" 120"
White	Smooth	1/16" - 1" 1/4" - 1/2"	48" 48"	96" 120"
White	Matte	1/8" - 1/2"	48"	96"
Euro Gray	Smooth	1/8", 1/4", 1/2",3/4",1"	48"	96"

Properties	Units	Value1	ASTM Method
Physical
Density	g/cm3	1.42	D 792
Water Absorption	%	0.06	D 570
Rockwell Hardness	R Scale	115	D 785
Shore Durometer	D	89	D 2240
Cell Class	–	12454-B	D 1784
Mechanical
Tensile Modulus	psi	411,000	D 638
Yield Strength	psi	7,500	D 638
Flexural Modulus	psi	481,000	D 790
Yield Strength	psi	12,800	D790
Izod Impact	ft-lb/in	1.0	D 256
Thermal
Vicat Softening Point	°C/°F	83/181	D 1525
Heat Deflection Temperature @66 psi	°C/°F	82/179	D 648
Heat Deflection Temperature @264 psi	°C/°F	80/176	D 648
Linear Coefficient of Expansion	in/in/°C	5.8 x 10-5	D 696
Linear Coefficient of Expansion	in/in/°F	3.2 x 10-5	D 696
Flammability Rating
Flammability	–	Self-Extinguishing	D 635
Flammability	–	0	UL 94V
Flame Spread	–	15	E 84
Chemical
Chemical Resistance	–	Class B	D 1784
Electrical
Electrical Volume Resistivity	Ohm/cm	6.0 x 1015	D 257
Dielectric Constant	60 Hz	3.19	D 150
Dissipation Factor	60 Hz	0.0096	D 150
Loss Index	60 Hz	0.030	D 150
Dielectric Strength	Volts/mil	544	D 149

VINTEC I® is a registered trademark of Vycom

        [ Home ] [ About AGS ] [ Contact ] [ Site Map ]

        Send mail to tech@scentsationalconcepts.com with questions or comments about this web site.
        Copyright © 2004-2008 Advanced Gasket & Supply
        Last modified: 05/21/08