 |
Vegetable Fiber Material is a highly compressible, special blend of cellulose
fibers treated with a glue-glycerin binder rendered insoluble by means of a
tanning solution which gives it strong, flexible, oil proof properties excellent
sealing ability. |
FiberFlex
"Detroiter" Vegetable Fiber Sheet Packing
This protein-glycerine treated fiber gasket
material is used for general purpose flange gaskets. Excellent for use against
water, oil, grease, coaltar, gasoline, etc. UL Branded material available.
Color: Tan
Specification
Compliance:
HH-P-98G, Type 1 only, MIL-G-12803A/B/C,
ASTM D 1170 and SAE J90
ASTM F 104 and SAE J90
UL Listing Number: MH 4649 (763N)
Maximum Recommended Service Temperature 250 deg. F.
Standard Thicknesses 1/64", 1/32",
3/64", 1/16", 3/32", 1/8", 3/16", 1/4"
Width:
36" nominal
Vegetable
Fiber
Gaskade Vegetable Fiber material is highly conformable to
compensate for distortion in flanges making it an excellent general purpose
gasket material.
Color: Natural / Tan
Specification
Compliance:
ASTM F104-92
& SAE 90 F326128E21M6
ASTM-D-1170-62T & SAE 90 P3313B
ASTM-104 & SAE 90 F326117M6
MIL-G-12803a P3313B
MIL-G-12803b F326128M6
MIL-G-12803c F326128M6
HHP96G Type 1
other specifications also apply
Maximum Recommended Service Temperature 250 deg. F.
Specifications:
Compressibility at 1000 psi: 23%-40% Recovery: 40%
Tensile Strength: 2750 psi min.
Color: Black
Specification Compliance:
ASTM F104-92 & SAE 90 F326128E21M6
ASTM-D-1170-62T & SAE 90 P3313B
ASTM-104 & SAE 90 F326117M6
MIL-G-12803a P3313B
MIL-G-12803b F326128M6
MIL-G-12803c F326128M6
HHP96G Type 1
other specifications may apply
Maximum Recommended Service Temperature 250 deg. F.
Specifications:
Compressibility at 1000 psi: 23%-40% Recovery: 40%
Tensile Strength: 2750 psi min.
Fluid Aging
Properties |
Weight
Increase |
Thickness
Increase |
|
ASTM Oil #3 |
15% max. |
5% max. |
|
ASTM Fuel B |
15% max. |
5% max.
|
|
Distilled Water |
75% max. |
20% max. |
Gaskaflex 450
Gaskaflex 450 is a non-asbestos, high
density gasket material with fibrous reinforcement for higher temperature
applications (400-480 deg. F.) The nitrile binder and resin system has been
chosen to produce a product with good dimensional stability, fluid resistance
and flexibility.
Specification Compliance:
ASTM F104-88
F724159 M5
Maximum Recommended Service Temperature 480 deg. F.
Specifications:
Compressibility at 5000 psi 23%
Recovery 40%
Tensile Strength 1600 psi min.
Density 78 lb/ft.
Fluid Aging
Properties |
Weight
Increase |
Thickness
Increase |
Compressibility
@ 5000 psi |
ASTM Oil #3
5 hrs @
300ºF |
33% |
10% |
30% |
ASTM Oil
#1
5 hrs @
300ºF |
25% |
3% |
25% |
ASTM
Fuel B
5 hrs @
85ºF |
28% |
12% |
|
Gaskaflex 710
Gaskaflex 710 is a cellulose fiber type gasket material with
nitrile rubber binder. Recommended for use with aluminum alloys, iron and steel
when low adhesion and corrosion are necessary. Gaskaflex 710 is resistant to
oils, fuels and anti-freeze and is recommended for applications where excellent
torque is required.
Specification Compliance:
ASTM F104-88
F333145
ASTM D1170-62T P3442A
ASTM F104-88 P3442A
Maximum
Recommended Service Temperature 300 deg. F.
Specifications:
Compressibility at 1000 psi 18%
Recovery 50%
Tensile Strength 2700 psi min.
Density 60 lb/ft.
Fluid Aging
Properties |
Weight
Increase |
Thickness
Increase |
ASTM Oil #3
22 hrs @
85ºF |
30% |
3% |
ASTM Oil
#1
22 hrs @
85ºF |
33% |
7% |
ASTM
Fuel B
22 hrs @
85ºF |
30% |
30% |
