Insulators for Electronics
Designs can incorporate additional layers of insulation, pressure sensitive adhesives, and conductive mediums according to your specifications.

Shielding requirements often enclose PC boards or line the inside of an enclosure, either completely or partially. Parts can be scored to allow creasing and/or include perforations to allow for easy bending and installation.
 

Material	Color	Thicknesses					Flamability Specifications	Maximum Temperature	Dielectric Strength(V) ASTM D-149
PVC	Black	0.010					UL 94VTM-0	150°F	4500 @ 10 mil
	White	0.010	0.015				UL 94V-0
Polyester (Mylar®, PETG, etc.)	Clear	0.002	0.003	0.005	0.010		UL 94VTM-2	350°F	4500 @ 1 mil
Formex®	Black	0.005	0.010	0.017	0.030	0.062	UL 94VTM-0	235°F	22000  @ 10 mils
Polypropylene	White			0.017	0.030	0.062	UL 94V-0
Lexan®	Black		0.010	0.017			UL 94V-0	275°F	17000 @ 10 mils
Polycarbonate	Clear	0.005	0.010	0.020	0.030
Valox®	White	0.005	0.010	0.015	0.030		UL 94VTM-0	400°F	15650 @ 10 mils
Nomex® 410	Beige/Tan	0.002		0.015			UL 94V-0	450°F	8000 @ 10 mils
Kapton® Film	Amber	0.001	0.003				UL 94V-0	500°F	7000 @ 1 mil

Data is provided strictly for reference and comparison only. No specific warranties are implied.
Mylar, Nomex, and Kapton are registered trademarks of E.I. DuPont deNemours & Co., Inc.
Lexan and Valox are registered trademarks of GE Plastics.
Formex is a registered trademark of ITW Fastex, FRP Products Division.

        [ Home ] [ About AGS ] [ Contact ] [ Site Map ]

        Send mail to tech@scentsationalconcepts.com with questions or comments about this web site.
        Copyright © 2004-2008 Advanced Gasket & Supply
        Last modified: 05/21/08